2.
After loosening the mounting screws, then remove the steering column shroud lower panel (A).
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
After loosening the mounting screws, then remove the steering column shroud lower panel (A).
Install in the reverse order of removal.
Replace any damaged clips.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Lower the steering wheel.
Using a screwdriver or remover, remove the steering column shroud upper panel (A).
Install in the reverse order of removal.
Replace any damaged clips.
