1.
Loosen the radiator upper cover mounting bolts.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Loosen the radiator upper cover mounting bolts.
Loosen the front bumper lower mounting bolts.
After loosening the front bumper side's mounting screw, then disconnect the side's.
Disconnect the fog lamp connector (A).
Remove the front bumper cover (A).
Install in the reverse order of removal.
Make sure the connector is plugged in properly.
Replace any damaged clips.
