3.
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
When installing the belt, make sure not to damage the pretensioner.
Remove the center pillar lower trim.
(Refer to Interior Trim - "Center Pillar Trim")
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Disconnect the connector (A) after loosening the mounting bolt and removing the front safety belt retractor (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
[India - General : Standard]
[General : Option]
Install in the reverse order of removal.
Make sure the connector is plugged in properly.
Replace any damaged clips.
