2.
After loosening the mounting bolt, then remove the second row seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
When installing the belt, make sure not to damage the retractor.
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
After loosening the mounting bolt, then remove the second row seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
After loosening the mounting bolt, then remove the second row seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Replace any damaged clips.
