Connect scantool to Data Link Connector(DLC).

Warm up the engine to normal operating temperature.

Monitor that DTC P1765 is retrieved on scantool.

Is the DTC P1765 is retrieved on scantool ?

YES

▶ This is problem with automatic transaxle. Go to Automatic transaxle troubleshooting procedure.

NO

▶ Fault is intermittent caused by poor contact in the ECM’s connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification of Vehicle Repair" procedure.