Check Clutch switch.
Ignition "ON" & Engine "OFF".
Disconnect Clutch switch.
Measure continuity between terminal 1 and 2 of clutch switch connector (To clutch switch connector).
Clutch Pedal ON | Clutch Pedal OFF |
Continuity (Below 1Ω) | No continuity (O.L Ω) |
Is the measured resistance within specifications ?
YES
▶ Substitute with a known-good ECM and check for proper operation.
If the problem is corrected, replace ECM and then go to "Verification of Vehicle Repair" procedure.
NO
▶ Substitute with a known-good Clutch switch and check for proper operation.
If the problem is corrected, replace Clutch switch and then go to "Verification of Vehicle Repair" procedure.
