4.
Using a scan tool, clear the DTCs.
Ignition "OFF", connect scantool.
Ignition "ON"& Engine "OFF", select "Diagnostic Trouble Codes(DTCs)" mode.
Monitor diagnostic trouble code and present of trouble code.
Using a scan tool, clear the DTCs.
Is DTC present problem ?
YES
Side Impact Sensor are defected Go to "Sensor Inspection" procedure.
If the problem is corrected,replace SIS or SRSCM if necessary and then go to "Verification of Vehicle Repair" procedure.
NO
Intermittent failure, system is OK at this moment. Do not change Side Impact sensor.
