Refer to DTC P0707
Starting engine is possible only in parking and neutral state. Select lever position signal is transmitted to TCM in order to control the select range.
Item | Detecting Condition & Fail Safe | Possible cause |
DTC Strategy | ● - | |
Enable Conditions | ● - | |
Threshold value | ● A situation with the two or more signals of INHIBITOR SW continuance over the 30 seconds | |
Diagnostic Time | ● Over the 30 seconds continuously | |
Fail Safe | ● The system is controlled with the signal just before the detecting condition and after returning, is continuously done with the signal just after reversion. |
Refer to DTC P0707
Many malfunctions in the electrical system may be caused from poor harness and terminals. These faults can be caused by interference from other electrical systems and mechanical or chemical damage.
Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
Has a problem been found?
▶ Repair as necessary and go to "Verification vehicle Repair" procedure.
▶ Go to the next procedure.
Refer to DTC P0707
Refer to DTC P0707
Refer to DTC P0707
Refer to DTC P0707
