3.
Check current data.
A.
Specification :
Approx. 0.2~0.8V(0~0.5˚) at Throttle closed
Approx. 4.25~4.7V(85˚) at W.O.T
The purpose of the Inspection is to check TPS and TPS adjustment by using scanner(TPS output voltage at current data). When throttle valve is entirely closed, If TPS output voltage is below the specified value, poor power/acceleration could occur.
IG "ON"
Connect a scanner to Data Link Connector (DLC).
Check current data.
Specification :
Approx. 0.2~0.8V(0~0.5˚) at Throttle closed
Approx. 4.25~4.7V(85˚) at W.O.T
Is TPS current data normal?
YES
TPS is OK.
NO
Check the related harness or replace the TPS.
