Disconnect the wire connector from the ETACS module.
Inspect the connector on wire harness side as shown in the below.
Terminals No. | Test condition | Standard value |
A6-B12 (GND) | Door switch "ON" (Door opened) | Below 1Ω |
Door switch "OFF" (Door closed) | 1MΩ or higher | |
C13-B12 (GND) | Tailgate switch "ON" (Tailgate opened) | Below 1Ω |
Tailgate switch "OFF" (Tailgate closed) | 1MΩ or higher | |
C12-B12 (GND) | Engine hood switch "ON" (Engine hood opened) | Below 1Ω |
Engine hood switch "OFF" (Engine hood closed) | 1MΩ or higher | |
A5-B12 (GND) | Driver's door switch "ON" (Driver's door opened) | Below 1Ω |
Driver's door switch "OFF" (Driver's door closed) | 1MΩ or higher | |
A18-B12 (GND) | Assist door switch "ON" (Assist door opened) | Below 1Ω |
Assist door switch "OFF" (Assist door closed) | 1MΩ or higher | |
A16-B12 (GND) | Door warning switch "ON" (Key inserted) | Battery voltage |
Door warning switch "OFF" (Key removed) | Below 1V | |
A2-B12 (GND) | Always | Battery voltage |
A15-B12 (GND) | Ignition switch is turned to "ON" position | Battery voltage |
C1-B12 (GND) | Driver's door lock switch "ON" (Driver's door unlock detection) | Below 1Ω |
Driver's door lock switch "OFF" (Driver's door lock detection) | 1MΩ or higher | |
C2-B12 (GND) | Assist door lock switch "ON" (Assist door unlock detection) | Below 1Ω |
Assist door lock switch "OFF" (Assist door lock detection) | 1MΩ or higher | |
C9-B12 (GND) | Rear door lock switch "ON" (Rear door unlock detection) | Below 1Ω |
Rear door lock switch "OFF" (Rear door lock detection) | 1MΩ or higher | |
A4-B12 (GND) | Engine Start | Battery voltage |
B12(GND) - Body ground | Always | Below 1Ω |
B6-B12 (GND) | Burglar alarm horn operation | ON |
