4.
Check the fuel pump operation.
The purpose of fuel pump actuation test is to decide the the functionality of fuel system with possible ignition condition. If the fuel pump is operated well with pumping sound while fuel pump actuation test, go to "Fuel pump is OK Inspection " procedure. If it is not operated, go to "Fuel pump is bad Inspection" procedure.
Connect a scantool to Data Link Connector(DLC).
IG "ON"
Perform actuation test of fuel pump relay at the Actuation Test.
Check the fuel pump operation.
Does the fuel pump work?
YES
Go to "Fuel pump is OK Inspection" procedure.
NO
Go to "Fuel pump is bad Inspection" procedure.
