4.
Are any DTCs present ?
YES
a.
Go to the applicable troubleshooting procedure.
NO
a.
System performing to specification at this time.
After a repair, it is essential to verify that the fault has been corrected.
Connect scan tool and select "Diagnostic Trouble Codes(DTCs)" mode
Using a Scantool, Clear DTC.
Operate the vehicle within DTC Detecting Condition in General Information. (Start and drive vehicle in gear and maintain vehicle speed is approx. 12km/h or more(7mph or more)
Are any DTCs present ?
YES
Go to the applicable troubleshooting procedure.
NO
System performing to specification at this time.
