4.
Are any DTCs present ?
YES
a.
Go to the applicable troubleshooting procedure.
NO
a.
System performing to specification at this time.
After a repair, it is essential to verify that the fault has been corrected.
Connect scantool and select "Diagnostic Trouble Codes(DTCs)" mode.
Using a scantool, Clear DTC.
Operate the vehicle within DTC Detecting Condition in General Information. (Start and drive vehicle in gear and maintain vehicle speed is approx. 10km/h or more (6mph or more))
Are any DTCs present ?
YES
Go to the applicable troubleshooting procedure.
NO
System performing to specification at this time.
