Component Inspection
Check Transponder
1.

Ignition "ON" and Engine "OFF"

2.

Perform neutral mode, key teaching and password teaching/changing according to "3. ECM Neutralization, 2. Key Teaching Procedure,4. Password Teaching in Reference Data" described in General Information

caution

Be sure that PIN code is prepared before performing neutral mode.

3.

Is the neutral, teaching and password teaching/changing mode completed ?

YES

a.

Thoroughly check connectors for looseness, poor connetion, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to " Verification of Vehicle Repair" procedure.

NO

a.

Substitute with a known-good virgin Transponder and monitor CURRENT DATA. If the key status is displayed as "Virgin", replace Transponder.

b.

Refer to " 7. things to remember before a repair(2)" and perform key teaching mode according to "2.Key Teaching Procedure belongs to Reference Data" described in General Information.

c.

Go to "Verification of Vehice Repair" procedure.

Яндекс.Метрика