4413212

1.

Ignition "OFF"

2.

Ignition "ON" & Engine "OFF".

3.

Connect scantool and select "Diagnostic Trouble Codes(DTCs)" mode.

4.

Using a scantool, Clear DTC.

5.

Select "Diagnostic Trouble Codes(DTCs)" mode again.

6.

Are any DTCs present ?

▶ Substitute with a known-good HECU and check for proper operation.

If problem is corrected, replace HECU and then go to "Verification of Vehicle Repair" procedure.

▶ Fault is intermittent caused by poor connection in CAN signal harness and/or HECU's connector.

Go to "Verification of Vehicle Repair" procedure.