Monitor Scantool Data
1.

Connect Scantool to Data Link Connector (DLC).

2.

Warm engine up to normal operating temperature.

3.

Turn "OFF" electrical devices and A/C.

4.

Monitor "BATTERY VOLTAGE" parameter on the Scantool.

a.

Specification : 12.5V~14.5V at idle without any load(800RPM)

caution

※ The vehicles with the alternator of over charging efficiency

1. Electrolyte inside battery overflows, check corrosion of battery and around of it.

2. Check if the smell of hydrogen gas which is produced at charging process during engine running state generates excessively.

3. Lamps on cluster, tail lamp and head lamp turn brighter intermittently .

Яндекс.Метрика