REPLACEMENT
note

After replacing a Mass Air Flow Sensor (MAFS) or Intake Air Temperature Sensor (IATS)#1, MUST proceed below procedure.

1.

Turn ignition switch OFF.

2.

Connect a scan tool to Data Link Connector (DLC).

3.

Turn ignition switch ON.

4.

Select "ENGINE CONTROL".

5.

Select "MANUAL SELECTION MODE".

6.

Select "D 2.0L VGT DIESEL".

7.

Select "COMPONET CHANGE ROUTNE"

8.

Select "AIR FLOW SENSOR CHANGE".

9.

Press "ENTER" key.

10.

Wait 10 seconds with IG ON.

11.

Turn ignition switch off.

Яндекс.Метрика