Install the rear axle assembly(A).
Install the strut mounting nuts(D).
Tightening torque
140 ~ 160Nm (1400 ~ 1600Kgf.cm, 103.3 ~ 118lbf.ft)
Install the suspension arm mounting nuts(C).
Tightening torque
140 ~ 160Nm (1400 ~ 1600Kgf.cm, 103.3 ~ 118lbf.ft)
Install the trailing arm mounting bolt(B).
Tightening torque
100 ~ 120Nm (1000 ~ 1200Kgf.cm, 73.8 ~ 88.5lbf.ft)
Install the brake caliper(B), then tighten the mounting bolt(A).
Tightening torque
50 ~ 60Nm (500 ~ 600Kgf.cm, 36.9 ~ 44.3lbf.ft)
Install the washer(C), castle nut(B) and split pin(A) from the rear hub.
Tightening torque
200 ~ 280Nm (2000 ~ 2800Kgf.cm, 147.5 ~ 206.6lbf.ft)
Install the wheel speed sensor(B) from the axle carrier(A).
Install the rear wheel and tire(A) on the rear hub(B).
Tightening torque
90 ~ 110Nm (900 ~ 1100Kgf.cm, 66.4 ~ 81.2lbf.ft)
Be careful not to damage the hub bolts(C) then install the rear wheel and tire(A).
