1.
After making a match mark(C) on the rubber coupling(A) and rear differential companion(B), remove the propeler shaft mounting bolts(D).
After making a match mark(C) on the rubber coupling(A) and rear differential companion(B), remove the propeler shaft mounting bolts(D).
Remove the center bearing bracket mounting bolts(A).
After making a match mark(C) on the flange yoke(A) and transaxle companion(B), remove the propeller shaft mounting bolts(D).
If a grease leak is shown around the nuiversal joint, be sure to put grease in the universal joint through the nipple enough until grease come out of the universal joint.
