4.
Check the dynamic damper for cracks, wear and position.
Check the driveshaft boots for damage and deterioration.
Check the ball joint for wear and damage.
Check the splines for wear and damage.
Check the dynamic damper for cracks, wear and position.
Check the driveshaft for cracks and wears.
Check the DOJ. outer race, inner race, cage and balls for rust or damage.
Check splines for wear.
Check for water, foreign matter, or rust in the BJ. boot.
When the BJ. assembly(A) is to be reused, do not wipe away the grease. Check that there are no foreign substances in the grease. If necessary, clean the BJ. assembly(A) and replace grease.
