Install the oil pump(A) to the oil pump bracket.

Hang the "V" belt on the oil pump and connect the suction hose(A) and the pressure hose(B).

note

Install the hose being careful so that it does not twist and come in contact with other components.

Insert a stick(C) or similar thing between the bracket(A) and the oil pump(B) to produce tension and confirm that velt deflection is within the standard value.

Add power steering fluid. (see page to ST-11)

Air bleed the system. (see page to ST-11)

Check the oil pump pressure. (see page to ST-12)