1.
Install the bushing(B) on the stabilizer bar(A).
note
Bring clamp(C) of stabilizer bar(A) into contact with bushing(B).
Install the bushing(B) on the stabilizer bar(A).
Bring clamp(C) of stabilizer bar(A) into contact with bushing(B).
Install the stabilizer bracket(B) and then install the stabilizer bar mounting bolts(A).
One side bracket should be temporarily tightened, and then install the bushing on the opposite side.
Tightening torque
50~65 Nm (500~650 Kgf·cm, 36.9~48.0 Ibf·ft)
Install the stabilizer bar link mounting nut(A).
Tightening torque
100~120 Nm (1000~1200 Kgf·cm, 73.8~88.5 Ibf·ft)
Employ the same manner described above step 3 and 4 to the other side.
Install the rear wheel and tire(A) on the rear hub(B).
Tightening torque
90~110 Nm (900~1100 Kgf·cm, 66.4~81.2 Ibf·ft)
Be careful not to damage the hub bolts(C) then install the rear wheel and tire(A).
