1.
Remove the quadrant inner cover (A), then disconnect the connector (B).
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the releted parts, to prevent damage.
Put on gloves to protect your hands.
Remove the quadrant inner cover (A), then disconnect the connector (B).
After disconnecting the connector (A), remove the outside rear view mirror (B).
Installation is the reverse of removal.
Push the inside rear view mirror base (A) down to remove the inside rear view mirror assembly (B).
Installation is the reverse of removal.
Remove the cover and connector (A).
Push the ECM mirror base down to remove the ECM mirror assembly (B).
Installation is the reverse of removal.
