1.
Remove the end cover (A).
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Remove the end cover (A).
Loosen the console mounting bolts and nuts.
After disconnecting the seat heater connector (A), remove the console assembly (B).
Installation is the reverse of removal.
Remove the end cover.
After loosening the armrest mounting screw, remove the armrest (A).
Installation is the reverse of removal.
Loosen the armrest cover (A) mounting screws.
Remove the pop-up unit (A).
Installation is the reverse of removal.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the trim and other parts.
Remove the crash pad center lower cover
(See page BD- 66).
Remove the front console upper cover (A) and disconnect the connector (B).
After loosening the mounting screw, remove the front console (A).
Installation is the reverse of removal.
