1.
Detach the wiper cap, then remove the windshield wiper arm and blade after removing a nut(A).
Tightening torque
28~33 Nm (280~330 kgf·cm, 20.2~23.8 lbf·ft)
Detach the wiper cap, then remove the windshield wiper arm and blade after removing a nut(A).
Tightening torque
28~33 Nm (280~330 kgf·cm, 20.2~23.8 lbf·ft)
Remove the weatherstrip then remove the cowl top cover(A) after removing 3 screws(B).
Remove the windshield wiper motor and linkage assembly after removing 2 bolts.
Disconnect the wiper motor connector(A) and windshield deicer connector(B) from the wiper motor & linkage assembly.
Tightening torque
7~11 Nm (70~110 kgf·cm, 5.1~8.0 lbf·ft)
Installation is the reverse of removal.
