1.
Detach the wiper cap(A), then remove the rear wiper arm after removing a nut(B).
Tightening torque
Nut(B) : 14~17 Nm (140~170 kgf·cm, 10.1~12.3 lbf·ft)
Detach the wiper cap(A), then remove the rear wiper arm after removing a nut(B).
Tightening torque
Nut(B) : 14~17 Nm (140~170 kgf·cm, 10.1~12.3 lbf·ft)
Remove the handle(B) after removing a nut(A).
Tightening torque
Nut(A) : 10~13 Nm (100~130 kgf·cm, 7.2~9.4 lbf·ft)
Open the tailgate glass then remove the rear wiper motor cover(A).
Disconnect the rear wiper motor connector then remove the rear wiper motor(B) after removing 3 nuts.
Tightening torque
Nut : 14~17 Nm (140~170 kgf·cm, 10.1~12.3 lbf·ft)
Installation is the reverse of removal.
