DTC DETECTING CONDITION

DTC No.

Detecting Condition

Possible Cause

Application engine

P1697

Tester message error

Request from tester is invalid

(Protocol layer violation- Invalid request, check sum error etc.)

D2.0,β2.0

INSPECTION PROCEDURE
1.

PROBLEM VERIFICATION

(1)

Connect the hi-scan (pro) to data link connector.

(2)

Turn the ignition switch to ON and verify the DTC "P1697" is displayed.

(3)

Erase the DTC "P1697" with the hi-scan (pro) and then monitor again.

Is the same code displayed ?

▶ Problem is intermittent and engine control module memory was not cleared.

▶ Replace the tester(HI-SCAN)

Яндекс.Метрика