2.
Loosen the adjusting nut (A) and the parking brake cables.
The parking brake cables must not be bent or distorted.
This will lead to stiff operation and premature failure.
Remove the floor console.
Loosen the adjusting nut (A) and the parking brake cables.
Disconnect the connector(A) of the parking brake switch.
Remove the 4 bolts and parking brake lever assembly(A).
Remove the wheel and tire.
Remove the brake drum and the brake shoe (Refer to the rear drum brake).
Remove the parking brake cable(A) from the brake shoe.
Remove the parking brake cable retaining ring (B), from the parking brake cable (A).
