Support the spec ified point of the vehicle with a lift.

Drain the power steering fluid. (see page ST-11)

Lift up the vehicle and remove the mounting clamp which is holding both the pressure tube and the return tube(A).

Disconnect the pressure tube fitting(A) at the gear box side. (when removing the pressure tube)

Remove the return hose(A) in the gear box. (when removing return hose)

Lower the vehicle.

Remove the clamp of the return tube and hose. (when removing return tube and hose)

Remove the return tube and hose. (when removing return hose)

Disconnect the pressure hose connector from the oil pump. (when removing the pressure hose)

Disconnect the pressure hose assembly. (when removing the pressure hose)

Remove the color tube mounting clip bolt. (when removing the color tube)

Disconnect the remove the color tube from the power steering oil reservoir tank side hose. (when working on the color tube)

Support the specified portion of the vehicle with a lift.

Insert the color tube from the front pump upper part to the lower part and install mounting bolts. (when installing the color tube)

Connect the color tube to the power steering oil reservoir tank side hose, return tube and hose side and fix it with clips. (when installing the color tube)

Place the pressure hose and tube assembly in position and connect it to the oil pump. (when installing the pressure hose and tube)

Raise the vehicle with a lift.

Fix the return hose(A) and pressure tube(B) fitting to the power steering gear box.

Fix the power steering pressure tube and return tube mounting clamp(A) with a bolt.

Lower the vehicle.

Add power steering fluid(PSF-3).

(see page ST-11)

Air bleed the system. (see page ST-11)