Turn the ignition switch OFF.
Pull up the lock (A) of the ABS control unit 26P connector , then disconnect the connector.
Disconnect the brake tubes from the HECU by unlocking the nuts counterclockwise with a spanner.
Loosen the 3 ABS HECU bracket bolts, then remove HECU and bracket.
Never attempt to disassemble the HECU.
The HECU must be transported and stored in.
Never shock to the HECU.
Remove the 3 bolts, then remove the bracket from HECU.
Installation is the reverse of removal.
Tighten the HECU mounting bolts and nuts to the specified torque.
Tightening torque
HECU bracket nuts :
11 ~ 14 N.m (1.1 ~ 1.4 kgf.m, 8.1 ~ 10.3 Ib-ft)
HECU bracket mounting bolt :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 Ib-ft)
