1.
Remove the front wheel speed sensor mounting bolt (A).
Remove the front wheel speed sensor mounting bolt (A).
Remove the front wheel guard (B), after removing the mud ground (A).
Remove the front wheel speed sensor after disconnecting the wheel speed sensor connector (A).
Remove the rear wheel speed sensor mounting bolt (A).
Remove the rear seat side pad then disconnect the rear wheel speed sensor connector (A).
Measure the output voltage between the teminal of the wheel speed sensor and the body ground.
Must use the resistance(100Ω), as shown below, in order to protect the active wheel speed sensor, before measuring the output voltage.
Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
V : 590mV ~ 840mV
V : 1.18V ~ 1.68V
Frequency range : 1~2,000Hz
