1.
Remove the trailing arm mounting bolts(A).
Remove the trailing arm mounting bolts(A).
Remove the bracket mounting bolt, nut of the vehicle side.
Remove the trailing arm(B).
Install the special tools(09529-21000 & 09216-21100) on the trailing arm(A).
Remove the bushing from the trailing arm(A).
Using the special tools(09529-21000 & 09216-21100), press-fit the rear trailing arm bushing.
Separation force is over 300Kg
Insert bush as to arrow direct toward trailing arm length.
Install the trailing arm mounting bolt(A).
Tightening torque
100~120 Nm (1000~1200 Kgf·cm, 73.8~88.5 Ibf·ft)
Install the trailing arm bracket mounting bolt, nut.
Tightening torque
100~120 Nm (1000~1200 Kgf·cm, 73.8~88.5 Ibf·ft)
The trailing arm mounting bolts, then fully tightened with the vehicle on the ground in unloaded condition.
