REPLACEMENT
1.

Disconnect the negative cable from the battery.

2.

Remove the crash pad (see BD group - crash pad).

3.

Disconnect the connectors from the blower relay the blower motor, the blower resistor (or power transistor) and the fresh and recirculation actuator.

Remove the self-tapping screws(A), the mounting nut(B), the mounting bolt(C) and the blower unit(D).

note

Make sure that there is no air leaking out of the blower and duct joints.

4.

Install in the reverse order of removal.

Яндекс.Метрика