8024208

Check transponder and ECU status.

(1)

IGN "ON" & Engine "OFF" with key intended to register

(2)

Monitor the "ECU, KEY, Smartra STATUS" Parameter on the Scantool.

Specification : 'LEARNT'

Fig.1) This data show that 3 keys have been taught, ECU has been learnt, the Key in key cylinder has been learnt and SMARTRA3 has been learnt

(3)

Has the KEY status learnt ?

	▶ Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, damage on the PCM/ECM or SMARTRA. And this DTC has not erased in previous repair. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
	▶ Go to "Component Inspection" Procedure.