Component Inspection
1.

Check SMARTRA.

(1)

IGN "ON" & Engine "OFF".

(2)

Neutralize Both "SMARTRA" and "PCM/ECM" and Register transponder key by scantool.

note

Pin code is required to Neutralize SMARTRA and to Register transponder key

(3)

Are Neutralizing and Registering completed normally ?

▶ Perform all the key teaching procedure with scantool.(All the keys must be retaught)and then, go to "Verification of Vehicle Repair" Procedure.

▶ Substitute with a known-good SMARTRA and Perform Key teaching procedure.

▶ If the problem is corrected, replace SMARTRA and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика