1.
Installation is the reverse of removal.
caution
Use a new washer (A) whenever installing.
caution
When installing the RH rear brake hose, the brake tube must not be touched to the tire.
1.
Insert the brake fixing clip (B) to the end after fixing the brake tube to the brake tube fixing clip (B).
2.
Tighten the brake tube flare nut (A) with a specified torque.
Tightening torque :
12.7 ~ 16.7 N.m (1.3 ~ 1.7 kgf.m, 9.4 ~ 12.3 lb-ft)
3.
Check again that the brake tube fixing clip (B) must be fixed in place.
