2.
Remove the drive belt (B) after loosening the belt tension by turning the bolt adjusting (A) counterclockwise.
Disconnect the battery negative terminal first, then the positive terminal.
Tightening torque :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Remove the drive belt (B) after loosening the belt tension by turning the bolt adjusting (A) counterclockwise.
Disconnect the compressor connector (A), alternator connector (B) and the cable (C) from alternator "B" terminal.
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
Pull out the through bolt and then remove the alternator (A).
Tightening torque
M10 bolt:
29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)
M8 bolt:
19.6 ~ 26.5N.m (2.0 ~ 2.7kgf.m, 14.5 ~ 19.5lb-ft)
Installation is the reverse order of removal.
