PCM sets P2610 when detects internal error.
Item | Detecting Condition | Possible Cause | |
Case1 | DTC Strategy |
–
During engine running check accuracy of time measurement by Engine-off timer micro-com. | 1. PCM |
Enable Conditions |
–
Time with IG KEY "ON" > 10 sec.
–
11V < Battery voltage < 16V | ||
Threshold Value |
–
Compare Engine-off timer time measurement with Engine running timer | ||
Diagnostic Time |
–
Immediate | ||
Case2 | DTC Strategy |
–
During Engine stop, check Engine-off timer start increment. | |
Enable Conditions |
–
After transition point ( N > 32rpm → N <32rpm)
–
11V < Battery voltage < 16V | ||
Threshold Value |
–
Engine-off timer after 2 sec. engine stop < 1sec. or > 4sec. | ||
Diagnostic Time |
–
2 sec. | ||
MIL On Condition |
–
2 Drive Cycles | ||
