Remove the side cover (A).

Loosen the mounting nut and clip remove the extension cover (A).

Disconnect the guide (B), from the glove box (C) and then remove the glove box left (A).

Disconnect the pin (A) and then remove the glove box (B).

Loosen the mounting screw, and then remove the crash pad panel (A).

Loosen the mounting bolts and screws and then remove the glove box housing (A).

Remove the shower duct (A).

Disconnect the auto defogging actuator connector (A).

Loosen the mounting screw and then remove the auto defogging actuator (B).

Install in the reverse order of removal.