2.
Remove the battery (A) and ECM (B).
(Refer to Engine Electrical group - "Battery")
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the battery (A) and ECM (B).
(Refer to Engine Electrical group - "Battery")
Remove the master cylinder.
(Refer to Master Cylinder)
Disconnect the vacuum hose (A) from the brake booster.
Remove the snap pin (A) and clevis pin (B).
Remove the mounting nuts (A).
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Remove the brake booster.
