3.
Disconnect the connector from the power window switch module.
Disconnect the negative (-) battery terminal.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
Disconnect the connector from the power window switch module.
Check for continuity between the terminals in each switch position according to the table.
Disconnect the negative (-) battery terminal.
Remove the front door trim and power window switch module. (Refer to the BD group - "Front door")
Disconnect the connector from the switch.
Check for continuity between the terminals in each switch position according to the table.
Disconnect the negative(-) battery terminal.
Remove the front door trim.
(Refer to the BD group - "Front door")
Disconnect the power window switch module connector(A) from the door trim.
Remove the power window switch(A) with pushing mounting hook.
Be careful not to damage door trim panel and door module mounting hooks.
Install the power window switch.
Connect the connector and install the front door trim panel.
