Disconnect the negative (-) battery terminal.
Loosening the head lamp mounting bolts (3EA) and disconnect the head lamp connector (B).
Then, remove the head lamp assembly (A).
Take care not to scratch the head lamp lens or fender.
Take care that holding clip (A) is not to be damaged.
Remove the dust caps from the head lamp assembly after turning in the counter clock-wise direction.
Turn off the lamp power.
Disconnect the connector.
Remove the dust cap(A).
Disconnect the connector.
Turn the bulb(A) counterclockwise to remove the head lamp low bulb.
Turn off the lamp power.
Remove the dust cap(A).
Remove the connector(A) and fixing clip(B).
Remove the bulb(A).
Turn off the lamp power.
Remove the socket and bulb(A) of turn signal lamp.
