1.
Remove the front wheel ＆ tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
caution
Be careful not to damage to the hub bolts when removing the front wheel ＆ tire.
Remove the front wheel ＆ tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts when removing the front wheel ＆ tire.
Disconnect the stabilizer link (A) with the front strut assembly after loosening the nut.
Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Loosen the nut and then remove the tie-rod end (A) with the front axle.
Tightening torque :
23.5 ~ 33.3N.m(2.4 ~ 3.4kgf.m, 19.4 ~ 24.6lb-ft)
Loosen the nut and then remove the lower arm (A).
Tightening torque :
78.5 ~ 88.3N.m(8.0 ~ 9.0kgf.m, 57.9 ~ 65.1lb-ft)
Loosen the bolt and then disconnect the universal joint assembly (A) from the pinion of the steering gear box.
Tightening torque :
32.4 ~ 37.3 N.m(3.3 ~ 3.8 kgf.m, 23.9 ~ 27.5 lb-ft)
Lock the steering wheel in the straight ahead position to prevent the damage of the clock spring inner cable when you handle the steering wheel.
Do not reuse the bolt
Remove the rubber hanger (A).
Loosen the roll rod (A) mounting bolts and nuts.
Tightening torque :
107.9 ~ 127.5N.m(11.0 ~ 13.0kgf.m, 79.6 ~ 94.0lb-ft)
Support the subframe with SST(09568-34000) and then remove the subframe (A) by loosening the mounting bolts and nuts.
Tightening torque :
Sub frame mounting nut :
156.9 ~ 176.5 N.m(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)
Sub frame stay mounting bolt :
44.1 ~ 53.9 N.m(4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)
Remove the stabilizer (A) from the front sub frame by loosening the mounting bolts & nuts.
Tightening torque :
44.1 ~ 53.9N.m(4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)
Disconnect the stabilizer link (A) with the stabilizer bar by loosening the nut.
Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Remove the bushing (A) and the clamp (B) from the stabilizer bar.
Installation is the reverse of removal.
Check the alignment.
(Refer to 'Tires/Wheels - alingment')
Check the bushing for wear and deterioration.
Check the front stabilizer bar for deformation.
Check the front stabilizer link ball joint for damage.
