2.
Remove the engine mounting support bracket (A) to make the working space.
Release the residual pressure in the fuel line.
(Refer to Fuel Delivery System - "Release Pressure in Fuel Line")
Remove the engine mounting support bracket (A) to make the working space.
Disconnect the fuel feed hose (A) by removing the clip.
Disconnect the vapor hose quick-connector (A).
Disconnect the sub fuel pump connecotor (A).
Remove the cold start fuel tank installation bolts (B) and then remove the cold start fuel tank assembly (C).
Remove the cold start fuel pump motor (A) after removing the clamp clip.
Install in the reverse order of removal.
Sub fuel tank installation bolt :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
