1.
Check for continuity between the Trunk lid open switch terminals.
Refer to the BE group - inspection / self diagnosis with GDS.
Refer to the BE group - inspection / self diagnosis with GDS.
Refer to the BE group - inspection / self diagnosis with GDS.
Check for continuity between the Trunk lid open switch terminals.
If continuity is not specified, inspect the switch
Disconnect the negative(-) battery terminal.
Remove the glove box housing.
(Refer to the BD group - "Crash pad")
Remove the smart key unit(A) with loosening bolt and nut, then disconnect the connector.
Take care not to scratch the crash pad and related parts.
Disconnect the negative(-) battery terminal.
Remove the console.
(Refer to the BD group - "Console")
Disconnect the connector ,then remove the interior #1 antenna(A) with loosening 2 screws.
Take care not to scratch the crash pad and related parts.
Disconnect the negative(-) battery terminal.
Remove the console.
(Refer to the BD group - "Console")
Disconnect the connector, then remove the interior #2 antenna(A) with loosening 2 screws.
Disconnect the negative(-) battery terminal.
Remove the trunk transverse trim.
(Refer to the BD group - "Interior trim")
Disconnect the connector ,then remove the trunk antenna(A) with loosening 2 nuts.
Disconnect the negative(-) battery terminal.
Remove the rear bumper.
(Refer to the BD group - "Rear bumper")
Remove the rear bumper rail.
(Refer to the BD group - "Rear bumper")
Disconnect the connector ,then remove the rear bumper antenna(A) with loosening 2 screws.
Disconnect the negative(-) battery terminal.
Remove the left head lamp.
Remove the buzzer(A) after disconnecting the connector.
Disconnect the negative(-) battery terminal.
Remove the front door module.
(Refer to the BD group - "Front door")
After loosening the mounting bolt, then remove the outside handle cover (A).
Disconnect the negative(-) battery terminal.
Remove the trunk door trim.
(Refer to the BD group - "Trunk")
Disconnect the trunk lid open switch connector (A).
Remove the trunk outside handle(A) after pressing the clips.
Install the smart key unit.
Connect the connector and install the smart key unit.
Install the glove box.
Install the negative (-) battery terminal and check the smart key system.
Install the interior #1 antenna.
Install the console.
Install the negative (-) battery terminal and check the smart key system.
Install the interior #2 antenna.
Install the console.
Install the negative (-) battery terminal and check the smart key system.
Install the trunk antenna.
Install the trunk transverse trim.
Install the negative (-) battery terminal and check the smart key system.
Install the exterior bumper antenna.
Install the rear bumper.
Install the negative (-) battery terminal and check the smart key system.
Install the buzzer.
Install the left head lamp.
Install the negative (-) battery terminal and check the smart key system.
Install the door outside handle.
Install the door trip.
Install the negative (-) battery terminal and check the smart key system.
Install the trunk open switch.
Install the trunk trim.
Install the negative (-) battery terminal and check the smart key system.
