1.
Using a screwdriver or remover, remove the crash pad center garnish (A).
Using a screwdriver or remover, remove the crash pad center garnish (A).
Remove the knob (A).
Remove the center console assembly.
(Refer to "Interior(console)" in BD group.)
Disconnect connector (A).
Remove the shift cable (A).
Remove the shift lever assembly (A) by removing the bolts.
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
Install in the reverse order of removal.
Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.
