The SRSCM sets DTC B136400 if there is a short to power in DBPT harness.
*In this case, SRSCM checks if there's any fault in circuit by sending current for a while.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Check Voltage | 1. Short to power in DBPT harness. 2. Poor connection of connected part. 3. Faulty DBPT. 4. Check SRSCM. | |
Enable Conditions |
•
Ignition "ON" | ||
Threshold Value |
•
Short to power in DBPT | ||
Diagnostic Time | Qualification |
•
More than 1 sec (100ms x 10) | |
De-Qualification |
•
More than 2 sec (100ms x 20) | ||
