This code is set when "HEAD LAMP LH_HIGH" circuit is shotted to ground for more than 150ms during "HEAD LAMP LH_HIGH" operating.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Load mornitoring | 1. Poor connection 2. Short to ground in "HEAD LAMP LH_HIGH" circuit 3. Faulty "HEAD LAMP LH_HIGH" 4. Faulty SJB | |
Enable Conditions |
•
IG key "ON" | ||
Threshold Value |
•
It is abnormal if output voltage is 0V
•
Head lamp high left circuit short to ground | ||
Diagnostic Time |
•
Immediately | ||
DTC Erasing | Active |
•
IG key "OFF" after solved problem
•
Head lamp "HIGH" switch "OFF" after solved problem | |
History |
•
Erased by GDS after solved problem | ||
