9873859

Monitor GDS Data

Connect GDS to Data Link Connector(DLC).

IG "ON" & ENG "ON".

Turn the steering wheel to the left or right.

Monitor the "STEERING ANGLE SNSR" parameters on the GDS.

Fig. 1) Test Condition : Ignition "ON" & Engine "ON".

Whenever steering wheel is turned, is the steering sensor's GDS data changed?

	1. Connect GDS to Data Link Connector(DLC). 2. IG "ON" & ENG "ON". 3. Keep the steering wheel in ceter position. 4. Monitor the "STEERING ANGLE SNSR" parameters on the GDS. Specification : Approx. 0 DEG 5. Is parameter displayed within specifications?
		▶ Go to "Component Inspection" procedure.
		▶ Go to next step. (6)
	▶ Go to "Terminal and Connector Inspection" procedure.

Perform steering angle sensor calibration.

(1)

IG "ON".

(2)

Line up the steering wheel in a straight.

(3)

Connect GDS to Data Link Connector(DLC).

(4)

Go in Elec. Power Steering system.

(5)

Perform ASP calibration. (figure 3).

(6)

Go to "Component Inspection" Precedure.