PCM sets DTC P06A5 if the PCM detects reference voltage of APT is Higher than threshold value.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Electrical Check | 1. Short to battery in power circuit 2. Poor connection or damaged harness 3. Faulty APT |
Enable Conditions |
•
IG "ON" | |
Threshold Value |
•
Short to battery
•
APT >5.5V | |
Diagnostic Time |
•
0.1sec. | |
MIL On Condition |
•
1 Drive Cycle |
( ※ APT : Air-Con Pressure Transducer )
